TP-Link T2500G-10TS - Chapter 2 User Interface; Enable; Enable-Admin

Chapter 2 User Interface
2.1 enable
Description
The enable command is used to access Privileged EXEC Mode from User
EXEC Mode.
Syntax
enable
Command Mode
User EXEC Mode
Privilege Requirement
None.
Example
If you have set the password to access Privileged EXEC Mode from User
EXEC Mode:
T2500G-10TS>enable
Enter password
：
T2500G-10TS#
2.2 enable-admin
Description
The enable-admin command is used to evaluate the current log-in user to
the Admin access level.
Syntax
enable-admin
Command Mode
Privileged Configuration Mode
Privilege Requirement
None.
20