TP-Link T2500G-10TS - End; Clipaging

Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Return to Global Configuration Mode from Interface Configuration Mode, and
then return to Privileged EXEC Mode:
T2500G-10TS(config-if)# exit
T2500G-10TS(config)#exit
T2500G-10TS#
2.8 end
Description
The end command is used to return to Privileged EXEC Mode.
Syntax
end
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Return to Privileged EXEC Mode from Interface Configuration Mode:
T2500G-10TS(config-if)#end
T2500G-10TS#
2.9 clipaging
Description
The clipaging command is used to enable the pause function for the screen
display. If you want to display all the related information of the switch at once
when using the show command, please use no clipaging command.
Syntax
clipaging
25