TP-Link T2500G-10TS - Show Ipv6 Mld Snooping Interface Filter; Show Ipv6 Mld Snooping Querier

Parameter
port —— Specify the port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display all of the interface information:
T2500G-10TS(config)# show ipv6 mld snooping interface
32.32 show ipv6 mld snooping interface filter
Description
The show ipv6 mld snooping interface filter command is used to display the
filter ids bounded to the interface.
Syntax
show ipv6 mld snooping interface filter [gigabitEthernet port ]
Parameter
port —— Specify the port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display all filter ids bounded to all interface:
T2500G-10TS(config)# show ipv6 mld snooping interface filter
32.33 show ipv6 mld snooping querier
Description
The show ipv6 mld snooping querier command is used to display the
Querier configuration of VLAN.
286