TP-Link T2500G-10TS - Ipv6 Mld Snooping Querier Vlan Max-Response-Time

Parameter
vlan-id —— The VLAN that enables the MLD querier function, ranging from 1
to 4094.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable MLD Querier function on VLAN 2:
T2500G-10TS(config)# ipv6 mld snooping querier vlan 2
32.17 ipv6 mld snooping querier vlan
max-response-time
Description
The ipv6 mld snooping querier vlan max-response-time command is used
to specify the max response time of the Query message. The default value is
10 seconds. To restore the default value, please use no ipv6 mld snooping
querier vlan max-response-time command.
Syntax
ipv6 mld snooping querier vlan vlan-id max-response-time time
no ipv6 mld snooping querier vlan
vlan-id max-response-time
Parameter
vlan-id —— The VLAN that enables the MLD Querier function, ranging from 1
to 4094.
time —— Specify the time in seconds, ranging from 1 to 25.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the max response time as 10s on VLAN 2:
277