TP-Link T2500G-10TS - Chapter 9 GVRP Commands; Gvrp; Gvrp (Interface)

Chapter 9 GVRP Commands
GVRP (GARP VLAN registration protocol) is an implementation of GARP (generic attribute
registration protocol). GVRP allows the switch to automatically add or remove the VLANs via
the dynamic VLAN registration information and propagate the local VLAN registration
information to other switches, without having to individually configure each VLAN.
9.1 gvrp
Description
The gvrp command is used to enable the GVRP function globally. To disable
the GVRP function, please use no gvrp command.
Syntax
gvrp
no gvrp
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable the GVRP function globally:
T2500G-10TS(config)#gvrp
9.2 gvrp (interface)
Description
The gvrp command is used to enable the GVRP function for the desired port.
To disable it, please use no gvrp command. The GVRP feature can only be
enabled for the trunk-type ports.
Syntax
gvrp
60