TP-Link T2500G-10TS - Show Rmon Event

Parameter
index —— The index number of the entry selected to display the
configuration, ranging from 1 to 12, in the format of 1-3, 5. You can select
more than one entry for each command. By default, the configuration of all
history sample entries is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the configuration of all history sample entries:
T2500G-10TS# show rmon history
33.25 show rmon event
Description
The show rmon event command is used to display the configuration of
SNMP-RMON Event.
Syntax
show rmon event [ index ]
Parameter
index —— The index number of the entry selected to display the
configuration, ranging from 1 to 12, in the format of 1-3, 5. You can select
more than one entry for each command. By default, the configuration of all
SNMP-RMON enabled entries is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the Event configuration of entry1-4:
T2500G-10TS# show rmon event 1-4
308