TP-Link T2500G-10TS - Show Ip Dhcp Snooping Information; Show Ip Dhcp Snooping Interface Gigabitethernet

Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the IP-MAC-VID-PORT binding table:
T2500G-10TS(config)# show ip source binding
13.15 show ip dhcp snooping information
Description
The show ip dhcp snooping information command is used to display the
Option 82 configuration status of DHCP-Snooping.
Syntax
show ip dhcp snooping information
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the Option 82 configuration status of DHCP-Snooping:
T2500G-10TS# show ip dhcp snooping information
13.16 show ip dhcp snooping interface
gigabitEthernet
Description
The show ip dhcp snooping interface gigabitEthernet command is used to
display the DHCP-Snooping configuration of desired Gigabit Ethernet ports.
Syntax
show ip dhcp snooping interface gigabitEthernet [ port ]
103