TP-Link T2500G-10TS - Revision

Parameters
name —— The region name, used to identify MST region. It ranges from 1 to
32 characters.
Command Mode
MST Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the region name of MST as “region1”:
T2500G-10TS(config)# spanning-tree mst configuration
T2500G-10TS(config-mst)# name region1
29.8 revision
Description
The revision command is used to configure the revision level of MST
instance.
Syntax
revision revision
Parameters
revision —— The revision level for MST region identification, ranging from 0
to 65535.
Command Mode
MST Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the revision level of MST as 100:
T2500G-10TS(config)# spanning-tree mst configuration
T2500G-10TS(config-mst)# revision 100
230