TP-Link T2500G-10TS - 12.3 DoS Defend

23.11 show interface status
Description
The show interface status command is used to display the connection
status of the Ethernet port.
Syntax
show interface status
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the connection status of all ports:
T2500G-10TS(config)# show interface status
23.12 show interface counters
Description
The show interface counters command is used to display the statistics
information of all ports.
Syntax
show interface counters
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the statistics information of all Ethernet ports:
T2500G-10TS(config)# show interface counters
Display the statistics information of port 1/0/2:
T2500G-10TS(config)# show interface counters gigabitEthernet 1/0/2
186