TP-Link T2500G-10TS - Show Dot1 Q-Tunnel Mapping; Show Dot1 Q-Tunnel Interface

6.8 show dot1q-tunnel mapping
Description
The show dot1q-tunnel mapping command is used to display the
information of VLAN Mapping entry.
Syntax
show dot1q-tunnel mapping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the information of VLAN Mapping entry:
T2500G-10TS(config)#show dot1q-tunnel mapping
6.9 show dot1q-tunnel interface
Description
The show dot1q-tunnel mapping interface command is used to display the
VLAN VPN port type.
Syntax
show dot1q-tunnel interface
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the port type of all VLAN VPN ports:
T2500G-10TS(config)#show dot1q-tunnel interface
49