Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure the daylight saving time as USA standard:
T2500G-10TS(config)#system-time dst predefined USA
21.4 system-time dst date
Description
The system-time dst date command is used to configure the one-off
daylight saving time. The start date is in the current year by default. The time
range of the daylight saving time must shorter than one year, but you can
configure it spanning years. To disable DST function, please use no
system-time dst command.
Syntax
system-time dst date {
smonth
} {
sday
} {
stime
} {
emonth
} {
eday
} {
etime
}
[
offset
]
Parameter
smonth
—— Month to start, with the options: Jan, Feb, Mar, Apr, May, Jun,
Jul, Aug, Sep, Oct, Nov, Dec
sday ——
Day to start, ranging from 1 to 31. Please mind that the number of
days depends on the month.
stime
—— Time to start, in the format of hh:mm.
emonth
—— Month to end, with the options: Jan, Feb, Mar, Apr, May, Jun, Jul,
Aug, Sep, Oct, Nov, Dec
eday
—— Day to end, ranging from 1 to 31. Please mind that the number of
days depends on the month.
etime
—— Time to end, in the format of hh:mm.
offset
—— Specify the time adding in minutes when Daylight Saving Time
comes. The value ranges from 1 to 1440 and the default value is 60 minutes.
It is optional.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
156
To Next Page
Loading...
