TP-Link T2500G-10TS - Show Lacp Sys-ID

Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the internal LACP information of EtherChannel Group 1:
T2500G-10TS(config)# show lacp 1 internal
10.8 show lacp sys-id
Description
The show lacp sys-id command is used to display the LACP system priority
globally.
Syntax
show lacp sys-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the LACP system priority:
T2500G-10TS(config)# show lacp sys-id
70