TP-Link T2500G-10TS - 9.1 IGMP Snooping

Example
Display the ARP detection configuration globally:
T2500G-10TS(config)#show ip arp inspection
14.7 show ip arp inspection interface
Description
The show ip arp inspection interface command is used to display the
interface configuration of ARP detection.
Syntax
show ip arp inspection interface [ gigabitEthernet port ]
Parameter
port ——The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of Gigabit Ethernet port 1/0/1:
T2500G-10TS(config)#show ip arp inspection interface gigabitEthernet
1/0/1
Display the configuration of all Ethernet ports:
T2500G-10TS(config)#show ip arp inspection interface
14.8 show ip arp inspection statistics
Description
The show ip arp inspection statistics command is used to display the
number of the illegal ARP packets received.
Syntax
show ip arp inspection statistics
109