February, 2008
6-148
WorkCentre 5225, 5230
GP 7
Launch Version
General Procedures
GP 7 Country Code Setting
Purpose
To input country code.
Procedure
Customer setting data:
1. Access Diagnostic Routines.
a. Enter UI Diagnostics (UI Diagnostic Mode).
2. Select NVM Read Write.
3. Perform NVM Read/Write on Chain Link 790-570.
0: No customer setting (default)
1: Customer setting for other than North America.
2: Customer setting for North America.
4. Close and Exit.
5. Automatically Reboot.
To Next Page
Loading...
