Xerox WorkCentre 5230

February, 2008
2-614
WorkCentre 5225, 5230
116-374, 116-375
Launch Version
Status Indicator Raps
116-374 Auto Switch RAP
An internal shutdown occurred after a processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).
116-375 Formatter RAP
A response such as system function recall error is detected.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).