Xerox WorkCentre 5230 User Manual

February, 2008
4-151
WorkCentre 5225, 5230
REP 16.2.13
Repairs and Adjustments
Launch Version
Figure 15 Orientation of 2 Gears and Stack Height Sensor Flag (j0st41728)
10. Install the Bushing onto the front end of the Set Clamp Shaft and install the E-ring. (Figure
16)
Figure 16 Installing the Bushing and E-ring (j0st41722)
11. Ensure that the Set Clamp Holder Springs are connected. (Figure 17)
Flag
Pinion Gear
position
Shaft Gear
position on Pin-
ion Gear
Install the E-
ring
Install
the
Bush-
ing and
the E-
ring

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier