February, 2008
2-346
WorkCentre 5225, 5230
024-919, 024-920
Launch Version
Status Indicator Raps
024-919 Face UP Tray Close RAP
When output was sent to the Face Up Tray, the Face Up Tray was detected as closed.
Initial Actions
Open the Face Up Tray.
Procedure
Check the connection of each Exit PWB (PL 9.1) connector.
Check that the P/Js on the MCU PWB (REP 9.1.1) are securely connected.
024-920 Face Down Tray 1 Paper Full RAP
Face Down Tray 1 full of output sheets.
Initial Actions
Open the Face Down Tray 1 and remove output sheets.
Procedure
Check the connection of each Exit PWB (PL 9.1) connector.
Check that the P/Js on the MCU PWB (REP 9.1.1) are securely connected.
To Next Page
Loading...
Need help?
General
