Xerox WorkCentre 5230

February, 2008
2-321
WorkCentre 5225, 5230
024-340, 024-341
Status Indicator Raps
Launch Version
024-340 IOT-ESS Communication Failure 1 RAP
An abnormal parameter is set for the send function.
Initial Actions
Refer to BSD 3.1, 16.1.
Procedure
Check that P/Js 402 on the MCU PWB (PL 9.1) and P/J 310 on the ESS PWB (PL 9.2) are
securely connected.
If the problem persists, reload Firmware (ADJ 9.3.1).
024-341 IOT-ESS Communication Failure 2 RAP
A transmission failure occurred, the Sequencing number of the sent Message Packet is incor-
rect.
Initial Actions
Refer to BSD 3.1, 16.1.
Procedure
Check that P/Js 402 on the MCU PWB (PL 9.1) and P/J 310 on the ESS PWB (PL 9.2) are
securely connected.
If the problem persists reload Firmware (ADJ 9.3.1).
If the problem persists, replace the MCU PWB (PL 9.1).