Xerox WorkCentre 5230 User Manual

February, 2008
4-135
WorkCentre 5225, 5230
REP 16.2.3, REP 16.2.4
Repairs and Adjustments
Launch Version
REP 16.2.3 Rear Upper Cover
Parts List on PL 23.6
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Undock the Finisher. (REP 16.2.1)
2. Remove the Booklet Maker. (REP 16.3.2)
3. Remove the Rear Upper Cover.
a. Remove the screws (4)
b. Remove the Rear Upper Cover.
Replacement
1. To install, carry out the removal steps in reverse order.
REP 16.2.4 Rear Lower Cover
Parts List on PL 23.6
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Undock the Finisher. (REP 16.2.1)
2. Remove the Rear Lower Cover.
a. Remove the screws (3).
b. Remove the Cover.
Replacement
1. To install, carry out the removal steps in reverse order.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier