February, 2008
4-143
WorkCentre 5225, 5230
REP 16.2.12
Repairs and Adjustments
Launch Version
REP 16.2.12 Finisher Stapler Assembly
Parts List on PL 23.8
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Folder Knife Assembly. (REP 16.2.14)
2. Remove the Front Cover Assembly. (REP 16.2.2)
3. Remove the Stapler Cover. (Figure 1)
a. Remove the Screw.
b. Remove the Stapler Cover.
Figure 1 Removing the Stapler Cover (jost41722.jpg)
4. Remove the Finisher Stapler Assembly. (Figure 2)
a. Disconnect the Connectors (2).
b. Remove the Screws (3).
c. Remove the Finisher Stapler Assembly.
Figure 2 Removing the Finisher Stapler Assembly (jost41737.jpg)
Replacement
Reverse the removal procedure for replacement.
Stapler
Cover
Screw
Screws (3)Connectors (2)Finisher Stapler Assembly
To Next Page
Loading...
Need help?
General
