EasyManua.ls Logo

Xerox WorkCentre 5230

Xerox WorkCentre 5230
1457 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
February, 2008
2-699
WorkCentre 5225, 5230
127-398 , 127-399
Status Indicator Raps
Launch Version
127-398 IPP Software RAP
BSD-ON:16.1
There is an IPP (Internet Printing Protocol) error.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists pull out and insert or replace the DIMM (PL 9.2).
If the problem persists replace the ESS PWB (PL 9.2).
127-399 JME Software RAP
BSD-ON:16.1
Due to a fatal error that occurred in processing related to the JME, subsequent processes cannot be
performed.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists pull out and insert or replace the DIMM (PL 9.2).
If the problem persists replace the ESS PWB (PL 9.2).

Table of Contents

Other manuals for Xerox WorkCentre 5230

Related product manuals