Xerox WorkCentre 5230 User Manual

February, 2008
7-15
WorkCentre 5225, 5230
HCF Plug/Jack Locations
Wiring Data
Launch Version
HCF Plug/Jack Locations
How to use the Plug/Jack Location List
The Plug/Jack Location List below is provided to locate plugs, jacks, or other terminating
devices. Locate the desired termination device in the first column (Connector Number) of the
list. Refer to the second column (Figure Number) to determine the figure number of the electri
-
cal termination device. Refer to the (Item Number) column to determine the item number in the
adjacent Figure Number column. The fourth column supplies the title of the Figure.
NOTE: Connectors numbered “CN” and “FS” are listed after the “P and J” connectors.
Plug/Jack Illustrations
Figure 1 HCF 1/2
Table 1 Plug/Jack List
Connector
Number
Figure
Number
Item
Number
Figure Title
FS001 Figure 1 4 HCF
FS002 Figure 1 4 HCF
FS003 Figure 1 9 HCF
FS004 Figure 1 9 HCF
PF/JF01 Figure 2 4 HCF
PF/JF02 Figure 2 5 HCF
PF/JF03 Figure 2 6 HCF
PF/JF04 Figure 2 7 HCF
PF/JF05 Figure 2 8 HCF
PF/JF06 Figure 2 9 HCF
PF/JF08 Figure 2 3 HCF
PF/JF51 Figure 2 2 HCF
PF/JF52 Figure 2 1 HCF
PF/JF53 Figure 2 10 HCF
PF/JF54 Figure 1 3 HCF
PF/JF56 Figure 1 10 HCF
PF/JF56A Figure 1 10 HCF
PF/JF56B Figure 1 10 HCF
PF/JF57 Figure 2 11 HCF
PF/JF58 Figure 1 1 HCF
PF/JF59 Figure 1 2 HCF
PF/JF60 Figure 1 8 HCF
PF/JF61 Figure 1 6 HCF
PF/JF62 Figure 1 7 HCF
PF/JF67 Figure 1 5 HCF

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier