Xerox WorkCentre 5230 User Manual

February, 2008
2-24
WorkCentre 5225, 5230
003-332, 003-333
Launch Version
Status Indicator Raps
003-332 IISS-ESS Communication Failure 13 RAP
The Check Code of the received Message Packet is incorrect.)
Procedure
Check the P/Js on the IIT/IPS PWB (PL 11.3).
Check the P/Js on ESS PWB (PL 9.2).
If the problem persists, reload Firmware (ADJ 9.3.1).
003-333 IISS-ESS Communication Failure 14 RAP
A parity error was detected by the UART.
Procedure
Check the P/Js on the IIT/IPS PWB (PL 11.3).
Check the P/Js on ESS PWB (PL 9.2).
If the problem persists, reload Firmware (ADJ 9.3.1).

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier