Xerox WorkCentre 5230 User Manual

February, 2008
2-32
WorkCentre 5225, 5230
003-753, 003-754
Launch Version
Status Indicator Raps
003-753 Cannot scan over 300DPI RAP
The selected resolution was too large for scanning mixed size originals using the document
feeder.
Procedure
A menu setup is incorrect. Refer customer to following User Guide headings:
• Resolution
• Internet Fax Profile
• Scan Resolution
003-754 S2X Recovery RAP
There is a recoverable S2X error.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job if the error did not clear after the power off/on.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier