February, 2008
2-46
WorkCentre 5225, 5230
003-966, 003-967
Launch Version
Status Indicator Raps
003-966 ATS/APS No Destination (IIT) RAP
There was no tray for APS (Auto Paper Selection).
Procedure
Change the parameter setting and repeat the operation.
003-967 DADF APS No Destination RAP
• Document size with DADF 8.5×11SEF Document size input not included.
• Mix Size is not selected.
• Magnification is variable.
APS Copy job with the above is designated but the tray to be selected is not available.
Although A4SEF original is set, it is detected as 8.5×11SEF.
Procedure
1. Load tray with the paper of the size displayed on the Panel or select the tray in which the
paper requested is loaded.
2. If A4SEF document is detected as Letter document, cancel the job and then readjust
DADF document guide securely until they touches the edges of the documents. Re-run
the job.
To Next Page
Loading...
Need help?
General
