Xerox WorkCentre 5230 User Manual

February, 2008
2-53
WorkCentre 5225, 5230
003-982
Status Indicator Raps
Launch Version
003-982 IIT HDD Access Error RAP
BSD-ON:3.1/6.2
There is a problem with IIT accessing the Hard Drive.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Check HDD electrical connections (PL 9.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists perform Hard Disk Diagnostic Program. If the problem persists perform
GP 6 Special Boot Modes HDD Initialization.
If the problem persists, replace the IIT/IPS PWB (PL 11.3).

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier