YASKAWA V1000 Technical Manual

Perform Auto-Tuning
Automatic tuning sets motor parameters. Refer to Auto-Tuning on page 100.
Check the Maintenance Period Using Drive Monitors
The maintenance period of fans and capacitors can be checked with drive monitors. Refer to Performance Life Monitors on page 294
Drive or Motor Faults are Displayed on a Digital Operator
Refer to Fault Displays, Causes, and Possible Solutions on page 253 and Refer to Alarm Codes, Causes, and Possible Solutions on page 266.
Standards Compliance
Refer to European Standards on page 434, Refer to UL Standards on page 441, and Refer to
Precautions for Korean Radio Waves Act on page 450
i.2 General Safety
18
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual

YASKAWA V1000 Specifications

General

Input Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Frequency	0-400 Hz
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Options	Modbus RTU
Ambient Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20°C to +65°C (-4°F to 149°F)
Humidity	95% (non-condensing)
Cooling Method	Forced Air Cooling
Enclosure	IP20