YASKAWA V1000 Technical Manual

B.5 China Localized Drive Default Values
Table B.5 Default Values of the China Localized Drive: CIMR-VBoo
Parameter Description
Control Mode (A1-02, E3-01)
V/f OLV PM
E1-04 Maximum Output Frequency 50.0 Hz 50.0 Hz
<1>
E1-06 Base Frequency 50.0 Hz 50.0 Hz
<1>
E1-07 Middle Output Frequency 2.5 Hz 3.0 Hz –
E1-09 Minimum Output Frequency 1.3 Hz 0.5 Hz
<1>
E3-04 Motor 2 Maximum Output Frequency 50.0 Hz 50.0 Hz –
E3-06 Motor 2 Base Frequency 50.0 Hz 50.0 Hz –
E3-07 Motor 2 Middle Output Frequency 2.5 Hz 3.0 Hz –
E3-09 Motor 2 Minimum Output Frequency 1.3 Hz 0.5 Hz –
<1> Default setting is determined by the motor code set to parameter E5-01.
B.5 China Localized Drive Default Values
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual
381
B
Parameter List

YASKAWA V1000 Specifications

General

Input Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Frequency	0-400 Hz
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Options	Modbus RTU
Ambient Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20°C to +65°C (-4°F to 149°F)
Humidity	95% (non-condensing)
Cooling Method	Forced Air Cooling
Enclosure	IP20