YASKAWA V1000 Technical Manual

n
Auto-Tuning Errors
Table 6.8 Auto-Tuning Error Displays
LED Operator
Display
Name Pg.
End1 Excessive V/f Setting 277
End2
Motor Iron Core Saturation
Coefficient Error
277
End3 Rated Current Setting Alarm 277
Er-01 Motor Data Error 277
Er-02 Alarm 277
Er-03 STOP button Input 277
LED Operator
Display
Name Pg.
Er-04 Line-to-Line Resistance Error 277
Er-05 No-Load Current Error 278
Er-08 Rated Slip Error 278
Er-09 Acceleration Error 278
Er-11 Motor Speed Error 278
Er-12 Current Detection Error 278
6.3 Drive Alarms, Faults, and Errors
252
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual

YASKAWA V1000 Specifications

General

Input Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Voltage	3-Phase 200-240VAC, 3-Phase 380-480VAC
Output Frequency	0-400 Hz
Control Method	V/f control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit, Ground Fault
Communication Options	Modbus RTU
Ambient Temperature	-10 to +50°C (14 to 122°F)
Storage Temperature	-20°C to +65°C (-4°F to 149°F)
Humidity	95% (non-condensing)
Cooling Method	Forced Air Cooling
Enclosure	IP20