Option Model Number Description
—
Frequency Reference Setting
Potentiometer (2 kΩ)
RV30YN20S2kΩ
External potentiometer for setting the frequency
reference by an analog input
—
Frequency Reference
Potentiometer Knob
CM-3S Knob for frequency reference potentiometer
— Meter Plate NPJT41561-1
Plate with scale for frequency reference setting
potentiometer
Interface Options
— Remote LCD Operator JVOP-180
Remote operator with 8 languages clear text LCD
display and copy function; Cable length max. 3
m
— USB/Copy Unit JVOP-181
Allows the user to copy and verify parameter
settings between drives. Can also be used as
adapter to connect the drive to a PC USB port
— PC Serial Cable WV103
Cable to connect the drive to a serial port of a PC
(3m)
— External Operator Cable WV001 / WV003
Extension cable (1 m or 3 m) to connect an external
operator to the drive
Mechanical Options
—
Heatsink External Mounting
Attachment
EZZ020568o
Installation kit for mounting the drive with the
heatsink outside of the panel (side-by-side
mounting possible)
— DIN Rail Attachment
EZZ08122o
Installation kit for mounting the drive on a DIN
rail
—
NEMA Type 1 Kit
<1>
EZZ020564o
Parts to make the drive conform to NEMA Type
1 enclosure
Others
24 V
Power Supply
24 Vdc Control Power Supply
Option
PS-V10o
Provides power to the control circuit and option
boards in the event of power loss. Allows the user
to monitor drive settings and fault information
when the main circuit has no power.
— Drive Wizard Plus —
PC tool for drive setup and parameter management
The installation files can be obtained at no charge
from:
Japan: http://www.e-mechatronics.com
Other areas: Contact a Yaskawa representative.
— DriveWorksEZ — PC tool for enhanced programming of the drive
Communication Options
—
PROFIBUS-DP
Communications Option
SI-P3/V Connects to a PROFIBUS-DP network
—
CC-Link Communications
Option
SI-C3/V Connects to a CC-Link network
—
DeviceNet Communications
Option
SI-N3/V Connects to a DeviceNet network
—
CANopen Communications
Option
SI-S3/V Connects to a CANopen network
—
EtherNet/IP Communications
Option
SI-EN3/V
<2>
Connects to an EtherNet/IP network
—
MECHATROLINK-II
Communications Option
SI-T3/V Connects to a MECHATROLINK-II network
—
MECHATROLINK-III
Communications Option
SI-ET3/V Connects to a MECHATROLINK-III network
—
CompoNet Communications
Option
SI-M3/V Connects to a CompoNet network
—
EtherCAT Communications
Option
SI-ES3/V
<2>
Connects to an EtherCAT network
—
PROFINET Communications
Option
SI-EP3/V
<2>
Connects to a PROFINET network
—
Modbus TCP/IP
Communications Option
SI-EM3/V
<2>
Connects to a Modbus/TCP network
—
LonWorks Communications
Option
SI-W3/V
<2>
Connects to a LonWorks network
— POWERLINK
SI-EL3/V
<2>
Connects to a POWERLINK network
<1> Available for drive models BA0001 to BA0018, 2A0001 to 2A0020, and 4A0001 to 4A0011.
<2> Under development
8.2 Drive Options and Peripheral Devices
306
YASKAWA ELECTRIC SIEP C710606 16C YASKAWA AC Drive – V1000 Technical Manual
To Next Page
Loading...
