YOKOGAWA ADMAG TI Series

<5. Functions>
140
IM 01E21A02-03EN
5.9.11 Other Setting
Inaddition,themaximumvoltagevaluesoftheowratesignalandcoilresistancevalueare
displayed as diagnostic information.
This information can be checked with the following parameters.
Thesettingcanbeconguredwiththefollowingparameters.
Menu path
Display Devicesetup►Diag/Service►Diagnosis►(seebelow)
F
OUNDATION
Fieldbus
Diagnostic►DTB►DeviceDiagnostics►Diagnostics/Alerts►Diagnostics►(see
below)
Block
Name
Relative
Index
Parameter
Description
Display F
OUNDATION Fieldbus
DTB 42 V peak hold Peak Hold Value
Displays the maximum voltage
valueoftheowratesignal
(onlyavailableforAXG,notfor
AXW).
DTB 43 IEX resistance Iex Coil Resistance
Displays the coil resistance
value.