EasyManuals Logo
Home>YOKOGAWA>Measuring Instruments>ADMAG TI Series

YOKOGAWA ADMAG TI Series User Manual

YOKOGAWA ADMAG TI Series
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
<5. Functions>
86
IM 01E21A02-03EN
IMPORTANT
When using the DC power as the transmitter power, set the commercially available power
frequency of the place where the transmitter will be used.
Set“Powersyncon/o󰀨”toO󰀨andthenset“Setpowerfreq”.
The excitation frequency and power frequency can be checked with the following parameters.
Menu path
Display Devicesetup►Detailedsetup►AUXcalculation►(seebelow)
F
OUNDATION
Fieldbus
DeviceConguration►STB►DeviceConguration►Conguration►AUXCalculation
Block
Name
Relative
Index
Parameter
Description
Display F
OUNDATION Fieldbus
STB 95 Iex power frequency Iex Power Frequency
Displays the power frequency
(synchronouswiththe
excitationfrequency).
STB 96 Meas power freq Mes Power Frequency
Displays the measured power
frequency.
5.5.5 Density Correction Calculation
Whenthetemperaturefromotherproduct(temperaturetransmitter,etc.)isobtainedfromMAO,
the density correction calculation can be performed based on temperature. The measurement
accuracyforthemassowrateisimprovedbyusingthisfunction.
Themassowrateiscalculatedusingthefollowingformula.
V
m
=V
f
xρ
V
m
:Massowrate[kg/s]
V
f
:Volumetricowrate[m
3
/s]
ρ:Density[kg/m
3
]
When the density correction calculation is performed based on temperature, the density is
obtainedusingthefollowingformula.Thedensitycompensatingratesmustbespeciedbased
on applications that use this product.
ρ
r
n
×{1+a
1
×(T
r
-T
n
)×10
-2
+a
2
×(T
r
-T
n
)
2
×10
-6
}
ρ
r
:Densitycorrectedbasedonthemeasuredtemperature[kg/m
3
]
ρ
n
:Standarddensity[kg/m
3
]
T
r
:Measuredtemperature[°C]
T
n
:Standardstatetemperature[°C]
a
1
: Primary compensating rate
a
2
: Secondary compensating rate
This function can be used only for AXG, not for AXW. The standard temperature and the
compensatingratescanbeconguredwiththefollowingparameters.
Menu path
Display Devicesetup►Detailedsetup►Provar►Temperature►(seebelow)
F
OUNDATION
Fieldbus
DeviceConguration►STB►DeviceConguration►Conguration►Process
Variables►Temperature►(seebelow)

Table of Contents

Other manuals for YOKOGAWA ADMAG TI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA ADMAG TI Series and is the answer not in the manual?

YOKOGAWA ADMAG TI Series Specifications

General IconGeneral
BrandYOKOGAWA
ModelADMAG TI Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals