<1. Introduction>
7
IM 01E21A02-03EN
1. Introduction
This manual provides the basic guidelines for basic operation of ADMAG TI Series AXG, AXW
magneticowmeterswithF
OUNDATION™ Fieldbus protocol.
For items which are not covered in this manual, read the applicable user’s manuals listed in
“Table1.1ManualandGeneralSpecicationsList”intheADMAGTISeriesInstallationManual.
ThesedocumentscanbedownloadedfromtheYOKOGAWAwebsite.Toensurethecorrectuse
of the product, read these manuals thoroughly and fully understand how to operate the product
beforeoperatingit.Toconrmthemodelnameandspecicationsoftheproduct,refertothe
generalspecications.
Websiteaddress:http://www.yokogawa.com/d/doc/
Precautions related to the protection, safety, and alteration of the
product
The following safety symbol marks are used in this manual and the product.
WARNING
A WARNING sign denotes a hazard. It calls attention to a procedure, practice, condition, or the
like, which, if not correctly performed or adhered to, could result in injury or death of personnel.
CAUTION
A CAUTION sign denotes a hazard. It calls attention to a procedure, practice, condition, or the
like, which, if not correctly performed or adhered to, could result in damage to or destruction of
part or all of the product.
IMPORTANT
An IMPORTANT sign denotes that attention is required to avoid damage to the product or system
failure.
NOTE
A NOTE sign denotes information necessary for essential understanding of operation and
features.
To Next Page
Loading...
Need help?
General
