YOKOGAWA ADMAG TI Series

<5. Functions>
143
IM 01E21A02-03EN
5.10.4 Test Mode Auto Reset
Ifthespeciedtimelapseswithnoparameterschangedwhilethetestmodeisenabled,thetest
mode is reset automatically. When any test mode parameter is changed, the test mode reset time
is extended.
Thesettingcanbeconguredwiththefollowingparameter.
Menu path
Display Devicesetup►Diag/Service►Test►(seebelow)
F
OUNDATION
Fieldbus
DeviceConguration►MTB►DeviceConguration►QueryDevice►MaintTBOriginal
Parameters(Part2)►Page4►Test
Block
Name
Relative
Index
Parameter
Description
Display F
OUNDATION Fieldbus
MTB 95 Release time Test Auto Release Time
Speciesthetimeto
automatically reset the test
mode.
From the table below, select the test mode auto reset time.
Selection
Description
Display
F
OUNDATION
Fieldbus
10 min 10min Sets the reset time to 10 min.
30 min 30min Sets the reset time to 30 min.
1 h 1h Sets the reset time to 1 hour.
3 h 3h Sets the reset time to 3 hours.
12 h 12h Sets the reset time to 12 hours.