<6. Parameter Lists>
177
IM 01E21A02-03EN
6.2 Sensor Transducer Block
 List of sensor transducer block parameter
Relative
Index
Index Parameter Name Default Value
Write
Mode
Description
0 2000 Block Header STB O/S
Information on this block, such
as Block Tag, DD Revision,
Execution, etc.
1 2001 ST_REV 0 -
Represents the revision level of
the setting parameter of the own
block. This revision is updated if
the setpoint is changed. Used to
check for parameter change, etc.
2 2002 TAG_DESC Space(32characters) AUTO
Universal parameter to store a
comment explaining tag contents.
3 2003 STRATEGY 1 AUTO
Universal parameter intended to
be used for the high-level system
to separate function blocks.
4 2004 ALERT_KEY 1 AUTO
Keyinformationtoidentifywhere
an alert takes place. Generally,
this parameter is used by the high-
levelsystemtoidentifyspecic
areas in a plant that are under
thecontrolofspecicoperators,
to separate necessary alerts
only. This is one of the universal
parameters.
5 2005 MODE_BLK
0x80(O/S)
0x80(O/S)
0x88(Auto,O/S)
0x08(Auto)
AUTO
-
AUTO
AUTO
Universal parameter to show a
block operation state. Consists of
Actual mode, Target mode, Permit
mode and Normal mode.
6 2006 BLOCK_ERR 0x0000 -
Indicates the error statuses related
to the own block.
7 2007 UPDATE_EVT
0(Uninitialized)
0(Uninitialized)
0,0
0
0
AUTO
-
-
-
-
Indicates contents of the event
whenanupdateevent(achange
tothesetpoint)occurs.
8 2008 BLOCK_ALM
0(Uninitialized)
0(Uninitialized)
0,0
0(Other)
0
AUTO
-
-
-
-
Indicates contents of the alarm
when a block alarm occurs.
9 2009
TRANSDUCER_
DIRECTORY
1
2010
-
-
Parameter to store the index of the
transducer included in the device.
10 2010
TRANSDUCER_
TYPE
32872(SensorTB) - Indicates the device type.
11 2011
TRANSDUCER_
TYPE_VER
0x0001 - Indicates the version of the device.
12 2012 XD_ERROR 0 -
Stores XD_ERROR which is
occurring in the sensor transducer
block.
13 2013
COLLECTION_
DIRECTORY
0 -
Stores indexes of important
parameters in the transducer
block and the item ID of the
corresponding DD.
14 2014
PRIMARY_
VALUE_TYPE
101(volumetric) -
Indicates a process type of
Primary Value.
15 2015 PRIMARY_VALUE
0
0
-
-
Indicatesthevolumetricowrate.
To Next Page
Loading...
Need help?
General
