YOKOGAWA ADMAG TI Series

<6. Parameter Lists>
176
IM 01E21A02-03EN
 Field diagnostic
Bit
Selection
F
OUNDATION Fieldbus
31 Electronics failure
30 Sensor/Actuator failure
29 Failure which requires investigation
28 Devicespecicfailure
26 Operated at the backup side
24 Firmware update error
23 Communicationcongurationerror
22 Non operating state
21 Calibration warning
20 Instrumentcongurationerror
19 Function restricted
18 Simulation mode
17 Manual mode
16 FunctionBlocknotication
15 Devicespecicfunctioncheck
13 Sensor-Actuatorvalueoutofspecication
12 Environmentoutofspecication
11 Devicespecicoutofspecication
9 Temporal decrease of value quality
8 Deteriorate estimation by counter
7 Deteriorate estimation by anomaly detection
6 Devicespecicmaintenancerequest2
5 Devicespecicmaintenancerequest1
3 Optionalfunctioncongurationerror
2 Alarm related information
1 Process alarm
0 CHECK