107
Printer Configuration Menus
WIRED GATEWAY
Description: View and, if necessary, change the default wired gateway.
To save changes to this setting, set WIRED IP PROTOCOL to PERMANENT, and then
reset the print server (see RESET NETWORK).
Accepted values: 000 to 255 for each field
Related ZPL command(s): ^ND
SGD command used: internal_wired.ip.gateway
Printer Web page: View and Modify Printer Settings > Network Communications Setup >
TCP/IP Settings
NETWORK
—
ACTIVE PRINT SERVER
—
PRIMARY NETWORK
—
WIRED IP ADDRESS
—
WIRED SUBNET MASK
—
WIRED GATEWAY
—
WIRED IP PROTOCOL
—
WIRED MAC ADDRESS
—
WLAN IP ADDRESS
—
WLAN SUBNET MASK
—
WLAN GATEWAY
—
WLAN IP PROTOCOL
—
WLAN MAC ADDRESS
—
ESSID
—
CHANNEL
—
SIGNAL
—
IP PORT
—
IP ALTERNATE PORT
—
PRINT INFORMATION
—
RESET NETWORK
—
VISIBILITY AGENT
—
LOAD DEFAULTS
To Next Page
Loading...