113
Printer Configuration Menus
WLAN IP PROTOCOL
Description: This parameter indicates if the Net Administrator/User (permanent) or the
server (dynamic) selects the Wireless print server’s IP address. When a dynamic option is
chosen, this parameter tells the method(s) by which this print server receives the IP
address from the server.
Important • The print server must be reset to allow changes to the network settings to take effect.
Accepted values: ALL, GLEANING ONLY, RARP, BOOTP, DHCP, DHCP & BOOTP,
PERMANENT
Related ZPL command(s): ^ND
SGD command used: wlan.ip.protocol
Printer Web page: View and Modify Printer Settings
> Network Communications Setup >
Wireless Setup
NETWORK
—
ACTIVE PRINT SERVER
—
PRIMARY NETWORK
—
WIRED IP ADDRESS
—
WIRED SUBNET MASK
—
WIRED GATEWAY
—
WIRED IP PROTOCOL
—
WIRED MAC ADDRESS
—
WLAN IP ADDRESS
—
WLAN SUBNET MASK
—
WLAN GATEWAY
—
WLAN IP PROTOCOL
—
WLAN MAC ADDRESS
—
ESSID
—
CHANNEL
—
SIGNAL
—
IP PORT
—
IP ALTERNATE PORT
—
PRINT INFORMATION
—
RESET NETWORK
—
VISIBILITY AGENT
—
LOAD DEFAULTS
To Next Page
Loading...