93
Printer Configuration Menus
DIAGNOSTIC MODE
Description: Use this diagnostics tool to cause the printer to output the hexadecimal
values for all data received by the printer. For more information, see Communication
Diagnostics Test.
Accepted values: DISABLED or ENABLED
Related ZPL command(s): ~JD
to enable, ~JE to disable
SGD command used: device.diagnostic_print
Print Server web page: The calibration procedure cannot be initiated through the web
pages.
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
CONFIG INFO TO USB
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
To Next Page
Loading...