343
ZPL Configuration
ZPL Printer Configuration Format
Managing more than one printer can be done by creating a printer configuration
programming file to send to one or more printers or ZebraNet ™ Bridge can be used to
clone a printer’s setup. Figure 1 below shows the basic structure of a ZPL programming
configuration file.
See the ZPL programmer’s guide and the Configuration Setting to Command Cross-
reference to create a programming file. The Zebra Setup Utility (ZSU) can be used to send
programming files to the printer. Windows Notepad (text editor) can be used to create
programing files.
Figure 1 • Configuration Parameter Format Structure
To Next Page
Loading...