Zebra ZD620 User Manual

54
Install Hardware Options
Installing the Attached Power Supply Base Options
The power base is ready to attach to the printer. The base is installed using Torx T10
wrench (
that you supply) and the mounting screws provided with the upgrade kit. The direct
thermal printer models attach to the printer with three (3) screws and thermal transfer
printer models use four (4) screws.
1. Remove any media rolls from the printer. Remove the original power supply cable
from the back of the printer.
2. Turn the printer over and align the power base to the bottom of the printer with the
printer power plug oriented toward the rear of the printer. The printer’s rubber feet
align with recesses in the top of the power base.
3. Use the screws provided to attach the power base to the printer. 3 screws for Direct
Thermal printers. 4 screws for thermal Transfer printers. Tighten the screws using the
Torx wrench supplied in the kit.
Thermal Transfer Printers Direct Thermal Printers

Zebra ZD620 Specifications

General

Color	-
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Maximum printing width	104 mm
Flash memory	512 MB
Internal memory	256 MB
Number of fonts	16
Built-in barcodes	1D, 2D, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, Data Matrix, EAN13, Industrial 2/5, Interleaved 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Page description languages	EPL2, XML, ZBI, ZPL II
Display	LCD
Color display	Yes
Product color	Black, Grey
Display resolution	320 x 240 pixels
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Mobile operating systems supported	Android, iOS
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	4.4 - 41 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Media thickness	0.08 - 0.1905 mm
Maximum label length	0.991 m
Maximum roll diameter	127 mm

Weight and Dimensions

Depth	221 mm
Width	177 mm
Height	151 mm