Zebra ZD620 - Standard (Media) Cutter; Linerless (Media) Cutter - Direct Thermal only

339
Media
Standard (Media) Cutter
The printer supports a field installed media cutter option for full width cutting of label liner,
tag or receipt media.
• A medium duty cutter for cutting label liner and light tag media (LINER/TAG). Do
not cut through labels, adhesive or embedded circuitry.
• Paper Thickness:
• Min. 0.06 mm (0.0024 inches)
• Max. 0.1905 mm (0.0075 inches)
• Cut Width:
• Min.15 mm (0.585 inches)
• Thermal Transfer Printers Max. 118 mm (4.65 inches)
• Direct Thermal Printers Max. 109 mm (4.29 inches)
• Minimum distance between cuts (label length): 25.4 mm (1 inch). Cutting shorter
media lengths between the cuts may cause the cutter to jam or error.
• By design, the cutter is self cleaning and does not require preventive maintenance
of the internal cutter mechanism.
Linerless (Media) Cutter - Direct Thermal only
The printer supports a field installed media cutter option for full width cutting of linerless
media.
• A full width linerless media cutter (LINERLESS CUT).
• Paper Thickness:
• Min. 0.06 mm (0.0024 inches)
• Max. 0.1905 mm (0.0075 inches)
• Cut Width:
• Min.15 mm (0.585 inches)
• Max. 118 mm (4.65 inches)
• Minimum distance between cuts (label length): 25.4 mm (1 inch). Cutting shorter
media lengths between the cuts may cause the cutter to jam or error.
• By design, the cutter is self cleaning and does not require preventive maintenance
of the internal cutter mechanism.
See Linerless Platen (Drive) Roller cleaning
and Media Path Cleaning to maintain optimal linerless media cut operation.