Zebra ZD620 - PRINT USB FILE

97
Printer Configuration Menus
PRINT USB FILE
Description: Select files to print from a USB Flash drive. See the exercises in Using the
USB Hosts Port and the NFC Capabilities for an exercise using this capability.
To print files from a USB Flash drive:
1. Insert a USB Flash drive into the printer’s USB host port.
2. The printer lists available files. SELECT ALL is available to print all available files on
the USB Flash drive.
3. Use the UP ARROW or DOWN ARROW to select a file from this menu.
4. Press RIGHT SELECT to select PRINT.
Accepted values:
NONE, SELECT ALL or PROGRAM FILE NAMES
Related ZPL command(s): Not Applicable
SGD command used: usb.host.read_list
Print Server web page: NotApplicable
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
CONFIG INFO TO USB
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT