337
Media
General Media and Print Specifications
• Direct Thermal — Max. Media width: 108mm (4.25 inches)
• Thermal Transfer — Max. Media width: 118mm (4.65 inch)
• All Printers — Min. Media width: 15mm (0.585 inch)
• Media length:
• 990mm (39 inches) max.
• 6.35mm (0.25 inches) min. – Tear Off or Label
• 12.7mm(0.50 inches) min. – Peel
• 25.4mm (1.0 inch) min. - Cutter
• Media thickness:
• 0.06mm (0.0024 inches) min. – all requirements
• 0.1905mm (0.0075 inches) max. – all requirements
• Media Roll Outer Diameter (O.D.) max.: 127mm (5.0 inches)
• Media Roll Core Inner Diameter (I.D.):
• 12.7mm (0.5 inch) I.D. - Standard roll configuration
• 25.4mm (1 inch) I.D. - Standard roll configuration
• 38.1mm (1.5 inches) I.D. - with optional media roll adapter
• 50.8mm (2.0 inches) I.D. - with optional media roll adapter
• 76.2mm (3.0 inches) I.D. - with optional media roll adapter
• Ribbon Rolls - 74 meter
• Ribbon Length - 74 m (243 feet)
• Ribbon Width Max. - 110 mm (4.33 inches)
• Ribbon Width Min. - 33 mm (1.3 inches)
‡
• Ribbon Core I.D. - 12.7mm (0.5 inches)
• Wax, Wax/Resin, and Resin transfer materials
• Ribbon Rolls - 300 meter
• Ribbon Length - 300 m (984 feet)
• Ribbon Width Max. - 110 mm (4.33 inches)
• Ribbon Width Min. - 33 mm (1.3 inches)
‡
• Wax, Wax/Resin, and Resin transfer materials
‡ - Transfer ribbon should always cover the entire width of the media (and liner) to prevent damaging the printhead.
• ZD420 Ribbon Cartridges
• Ribbon Length - 74 m (243 feet)
To Next Page
Loading...