82
Printer Configuration Menus
LABEL TOP
Description: Shifts the position of the image vertically on the label if necessary.
• Negative numbers move the image higher on the label (toward the printhead).
• Positive numbers move the image farther down on the label (away from the
printhead) by the specified number of dots.
Accepted values: –120
to 120
Related ZPL command(s): ^LT
SGD command used: media.printmode
Print Server web page: View and Modify Printer Settings
> General Setup >
Print Mode
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
LANGUAGE
To Next Page
Loading...