99
Printer Configuration Menus
STORE E: FILE TO USB
Description: Select files from the printer to store on a USB Flash drive. See the exercises
in
Using the USB Hosts Port and the NFC Capabilities on page 261 for an exercise using this
capability.
To copy files from the printer to a USB Flash drive:
1. Verify that a USB flash drive into the printer’s USB host port.
2. The printer lists available files. SELECT ALL is available to store all files available files
from the printer on the USB Flash drive.
3. Use the UP ARROW or DOWN ARROW to select a file from this menu.
4. Press RIGHT SELECT to select STORE.
Accepted values:
NONE, SELECTALL or PROGRAM FILE NAMES
SGD command used: usb.host.write_list
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
CONFIG INFO TO USB
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
To Next Page
Loading...