121
Printer Configuration Menus
VISIBILITY AGENT
Description: When the printer is connected to a wired or wireless network, it will attempt
to connect to Zebra’s Asset Visibility Service via the Cloud-based Zebra Printer Connector
using an encrypted, certificate-authenticated web socket connection. The printer sends
Discovery Data and Settings and Alerts Data. Data printed via any label formats is NOT
transmitted.
To opt out of this feature, disable this setting. For more information, see the “Opting Out of
the Asset Visibility Agent” application note at http://www.zebra.com
.
Accepted values: ON or OFF
SGD command used: weblink.zebra_connector.enable
Printer Web page: View and Modify Printer Settings > Network Configuration >
Cloud Connect Settings
NETWORK
—
ACTIVE PRINT SERVER
—
PRIMARY NETWORK
—
WIRED IP ADDRESS
—
WIRED SUBNET MASK
—
WIRED GATEWAY
—
WIRED IP PROTOCOL
—
WIRED MAC ADDRESS
—
WLAN IP ADDRESS
—
WLAN SUBNET MASK
—
WLAN GATEWAY
—
WLAN IP PROTOCOL
—
WLAN MAC ADDRESS
—
ESSID
—
CHANNEL
—
SIGNAL
—
IP PORT
—
IP ALTERNATE PORT
—
PRINT INFORMATION
—
RESET NETWORK
—
VISIBILITY AGENT
—
LOAD DEFAULTS
To Next Page
Loading...