65
Controls and Indicators
Status - Printhead Operation
Hot Surface Caution • The printhead may be hot and could cause sever burns. Allow the printhead
to cool.
Printhead Over Temp
The printhead is over temperature and paused to
allow the printhead to cool. The print operation will
resume after the printhead has cooled.
Printhead Under Temp
The printhead is under temperature. Typically, the
operating environment is below the printer’s
minimum operational temperature.
Printhead Shutdown
The printhead is over temperature. Turn the
printer OFF. After several minutes to allow the
printer to completely cool, turn the printer ON.
Printhead Resolution Error
The printer is unable to read the printhead
resolution type (dpi). The printhead has been
replaced incorrectly or with non-Zebra printhead.
Unauthorized Printhead Error
The printhead was replaced with one that is not a
genuine Zebra printhead. Install a genuine Zebra
printhead to continue.
To Next Page
Loading...