EasyManua.ls Logo

Zebra ZD620 - PRINT WIDTH

Zebra ZD620
348 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80
Printer Configuration Menus
PRINT WIDTH
Description: Specifies the width of the labels being used, in dots. The default value is the
maximum width for the printer, based on the printhead’s DPI value.
Accepted values:
ZD620 203 dpi = 0002
to 832dots
ZD620 300 dpi = 0002
to 1280*dots
ZT420 203 dpi = 0002
to 832dots
ZT420 300 dpi = 0002
to 1280*dots
*- EPL mode has a maximum default width of 1248 dots.
Related ZPL command(s): ^PW
SGD command used: ezpl.print_width
Print Server web page: View and Modify Printer Settings
> General Setup >
Print Width
Important Setting the print width too wide wastes formatting memory. Printing off the sides of the
label and onto the platen roller may damage the platen.
Note • Setting the width too narrow can result in portions of a label format not being printed on the
media.
Note• This setting can affect the horizontal position of the label format if the image was inverted
using the
^POI ZPL II command.

Table of Contents

Related product manuals