95
Printer Configuration Menus
RUN ZBI PROGRAM
Description: This menu item appears only if ZBI is enabled on your printer. If ZBI
programs have been downloaded to your printer, you may select one to run using this
menu item. If no program exists on your printer, NONE is listed.
To run a ZBI program that you have downloaded to your printer:
1. Use the UP ARROW or DOWN ARROW to select a file from this menu.
2. Press RIGHT SELECT to select RUN. If no program exists, the RUN option does not
perform an action.
Accepted values:
NONE or PROGRAM FILE NAMES
Related ZPL command(s): ^JI, ~JI
SGD command used: zbi.control.run
Print Server web page: Printer Home Page > Directory Listing
TOOLS
—
PRINT INFORMATION
—
IDLE DISPLAY
—
POWER UP ACTION
—
HEAD CLOSE ACTION
—
LOAD DEFAULTS
—
MEDIA/RIBBON CAL
—
DIAGNOSTIC MODE
—
ZBI ENABLED?
—
RUN ZBI PROGRAM
—
STOP ZBI PROGRAM
—
CONFIG INFO TO USB
—
PRINT USB FILE
—
COPY USB FILE TO E:
—
STORE E: FILE TO USB
—
PRINT STATION
—
PASSWORD PROTECT
—
PRINT TEST FORMAT
To Next Page
Loading...